Changing Your Telephone System's Date and Time


Aspire
(Telephone part numbers 08900xx)

To set the time for your Aspire system:

  1. From the System Administrator's telephone (normally extension 301), press CALL1 and dial 828.
  2. Dial two digits for the hour (24 hour)
    For example, 13=1:00 PM.
  3. Dial two digits for the minutes.
    You hear confirmation beeps.
  4. Press SPK to hang up.

i-Series (28i/124i/124ie/384i/704i)
(Telephone part numbers 92xxx)

To set the time and date for your i-Series system:

  1. From the System Administrator's telephone (normally extension 301), press CALL1 and dial 828.
  2. Dial the Time and Date password.
    The password is normally 0000.
  3. Dial two digits for the year (e.g., 05).
  4. Dial two digits for the month (01-12).
  5. Dial two digits for the day (01-31).
  6. Dial the day of the week (0-6).
    0=Sunday, 6=Saturday
  7. Dial two digits for the hour (24 hour).
    For example, 13=1:00 PM.
  8. Dial two digits for the minutes (00-60).
    You hear confirmation beeps.
  9. Press SPK to hang up.

DS1000/2000
(Telephone part numbers 80xxx)

To set the time and date for your DS1000/2000 System:

  1. From extension 300, dial #TD (#83).
    Do this without lifting the handset or pressing any other keys first.
  2. Enter the time in 24-hour clock using hours (2 digits), minutes (2 digits) and seconds (2 digits).
  3. Press HOLD.
  4. Enter the date using month (2 digits), day (2 digits), and year (4 digits).
  5. Press HOLD, then SPK to exit.

DS01/ONYX
(Telephone part numbers 88xxx)

To set the time:

  1. Lift handset.
  2. Press ICM.
  3. Press PGM#.
    -Your display shows, "DSS,EXT,6,9,8?."
  4. Dial T.
    -Your display shows, "SET TIME
    HHMMSS."
  5. Enter the hour (00-23: 0=12 midnight;
    12=12 noon; 23=11 P.M.)
  6. Enter the minutes (00-59).
  7. Enter the seconds (00-59).
  8. Hang up.

To set the date:

  1. Lift handset.
  2. Press ICM.
  3. Press PGM#.
    -Your display shows, "DSS,EXT,6,9,8?."
    3.
  4. Dial 9.
    -Your display shows, "SET DATE
    MMDDYY."
  5. Enter the month (01-12, 01=January;
    12=December)
  6. Enter the day of the month (01-31).
  7. Enter the last two digits of the year (00-99).
  8. Hang up.

Portrait 308/824
(Telephone part numbers 824xx)

To set the time and date:

  1. From extension 10, press SPK + FTR + CLEAR.
  2. Dial four digits for the year (e.g., 2005).
  3. Dial *.
  4. Dial two digits (01-12) for the month.
  5. Dial (01-31) for the date.
  6. Dial *.
  7. Dial a single digit (0-6) for the day.
    Sunday = 0, Monday =1
  8. Dial *.
  9. Dial four digits for the time (24-hour clock).
    For example, dial 1305 for 1:05 PM.
  10. Dial * and press SPK.
    The telephone display shows the new date and time.
   
NEC Unified Solutions, Inc.  
 
 
 

Copyright © 2007 NEC Infrontia, Inc.
All rights reserved.